Central of Georgia "Big Apple"

Last updated
Central of Georgia K class
("Big Apple")
Type and origin
Power typeSteam
Builder Lima Locomotive Works
Serial number8254–8261
Build dateOctober 1943
Total produced8
Specifications
Configuration:
   Whyte 4-8-4
   UIC 2′D2′ h2
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.73.5 in (1.867 m)
Adhesive weight 260,000 lb (120 t)
Loco weight447,400 lb (202.9 t)
Boiler pressure250  psi (1.72  MPa)
Cylinders Two, outside
Cylinder size 27 in × 30 in (686 mm × 762 mm)
Performance figures
Tractive effort 63,200  lbf (281.13  kN),
74,710 lbf (332.33 kN) with booster
Career
Operators Central of Georgia Railway
Class K
Numbers451458
NicknamesBig Apples
Retired1953
DispositionAll scrapped

The Central of Georgia Railway (CofG) K class (known as the "Big Apples") were a class of 4-8-4 steam locomotives produced by Lima Locomotive Works for the CofG during World War II.

The Central of Georgia Railway (CofG), like most other railroads, were in need of motive power during World War II. Freight and passenger traffic soared to new heights. Part of the wartime traffic consisted of "mains" as troop trains headed to and from the numerous military bases located on the line, namely Fort Benning, near Columbus, Georgia. The CofG had freight and passenger power that had been overhauled into tip top shape. However, it left it wear and tear on the existing steam engines. The Central decided they needed a new locomotive to replace their 4-8-2s in existing service handling trains like the Seminole and the Flamingo bought in from the Illinois Central Railroad and the Louisville and Nashville Railroad from Birmingham, Alabama. They decided that the class M Mountain could not handle those trains unassisted to Albany, Georgia.

The answer to this problem was answered by the Lima Locomotive Works in October 1943, when they delivered eight new dual service 4-8-4 locomotives. The engines were nicknamed "Big Apples" by engine crews on the western end of the railroad. Locomotive numbers were 451–458. Because of the War Production Board's restriction on designing new engines, they were patterned after the Southern Pacific GS-2 type 4-8-4s.

It was noted in the 1944 Railway Mechanical Engineers that fuel performance for the CofG K class 4-8-4s was well under 100 lb of coal per 1,000 gross ton miles and averaged 11.4 lb per passenger-train car mile in service

The "Big Apples" operated in passenger and freight service from Albany, Georgia to both Birmingham, Alabama and Atlanta, Georgia. They could handle 1,500 tons between Birmingham and Columbus, Georgia, unassisted and 2,350 tons from Macon, Georgia to Americus, Georgia. It is also believed that they could handle as many as 17 passenger cars on the Seminole and the Flamingo.

They lasted in service for 10 years. In 1953, they were withdrawn from service and were scrapped later that year. Engine #451 remained in storage in Macon, Georgia until 1959 when it was scrapped after the railroad failed to find a city or an institution to accept it as a display piece. [1]

Related Research Articles

<span class="mw-page-title-main">2-8-8-4</span> Articulated locomotive wheel arrangement

A 2-8-8-4 steam locomotive, under the Whyte notation, has two leading wheels, two sets of eight driving wheels, and a four-wheel trailing truck. The type was generally named the Yellowstone, a name given it by the first owner, the Northern Pacific Railway, whose lines ran near Yellowstone National Park. Seventy-two Yellowstone-type locomotives were built for four U.S. railroads.

<span class="mw-page-title-main">New York Central Mohawk</span> Class of NYC 4-8-2 locomotives

The New York Central Railroad (NYC) called the 4-8-2 type of steam locomotive the Mohawk type. It was known as the Mountain type on other roads, but the New York Central did not see the name as fitting on its famous Water Level Route. Instead, it picked the name of one of those rivers its rails followed, the Mohawk River, to name its newest type of locomotive. Despite the more common name, the 4-8-2 was actually suited in many ways more to flatland running than slow mountain slogging, with its 4-wheel leading truck for stability at speed. However, the L1s and L2s were unstable at higher speeds due to the lack of effective cross-balancing, making the 4-wheel leading truck simply a better distributor of the locomotives weight; the L1s and L2s were consequently limited to 60 mph (97 km/h), though this issue was resolved for the L3s and L4s using data gathered from two experimental L-2s.

<span class="mw-page-title-main">4-8-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.

<span class="mw-page-title-main">Selkirk locomotive</span>

The Selkirk locomotives were 36 steam locomotives of the 2-10-4 wheel arrangement built for Canadian Pacific Railway by Montreal Locomotive Works, Montreal in Quebec, Canada.

<span class="mw-page-title-main">Southern Railway (U.S.)</span> Defunct United States railroad

The Southern Railway was a class 1 railroad based in the Southern United States between 1894 and 1982, when it merged with the Norfolk and Western Railway (N&W) to form the Norfolk Southern Railway. The railroad was the product of nearly 150 predecessor lines that were combined, reorganized and recombined beginning in the 1830s, formally becoming the Southern Railway in 1894.

<span class="mw-page-title-main">2-8-4</span> Locomotive wheel arrangement

Under the Whyte notation, a 2-8-4 is a steam locomotive that has two unpowered leading wheels, followed by eight coupled and powered driving wheels, and four trailing wheels. This locomotive type is most often referred to as a Berkshire, though the Chesapeake and Ohio Railway used the name Kanawha for their 2-8-4s. In Europe, this wheel arrangement was mostly seen in mainline passenger express locomotives and, in certain countries, in tank locomotives.

<span class="mw-page-title-main">Little Joe (electric locomotive)</span> Class of General Electric locomotives

The Little Joe is a type of railroad electric locomotive built by General Electric. The locomotives had twelve axles, eight of them powered, in a 2-D+D-2 arrangement. They were originally intended to be exported to the Soviet Union and designed to operate on Soviet Railways (SZhD) 3,300-volt DC overhead line system. They were never exported to the Soviet Union due to rising political tensions. Only 20 were built, with 15 sold to domestic operators and five exported to Brazil.

<span class="mw-page-title-main">Atlantic Coast Line Railroad</span> Defunct American Class I railroad

The Atlantic Coast Line Railroad was a United States Class I railroad formed in 1900, though predecessor railroads had used the ACL brand since 1871. In 1967, it merged with long-time rival Seaboard Air Line Railroad to form the Seaboard Coast Line Railroad. Much of the original ACL network has been part of CSX Transportation since 1986.

<span class="mw-page-title-main">Louisville and Nashville Railroad</span> Defunct American Class I railway

The Louisville and Nashville Railroad, commonly called the L&N, was a Class I railroad that operated freight and passenger services in the southeast United States.

<span class="mw-page-title-main">Central of Georgia Railway</span> Railroad constructed to join Macon, Georgia, and Savannah, Georgia

The Central of Georgia Railway started as the Central Rail Road and Canal Company in 1833. As a way to better attract investment capital, the railroad changed its name to Central Rail Road and Banking Company of Georgia. This railroad was constructed to join the Macon and Western Railroad at Macon, Georgia, in the United States, and run to Savannah. This created a rail link from Chattanooga, on the Tennessee River, to seaports on the Atlantic Ocean. It took from 1837 to 1843 to build the railroad from Savannah to the eastern bank of the Ocmulgee River at Macon; a bridge into the city was not built until 1851.

The Western Railway of Alabama (WRA) also seen as "WofA" was created as the Western Railroad of Alabama by the owners of the Montgomery & West Point Railroad (M&WP) in 1860. It was built to further the M&WP's development West from Montgomery, Alabama to Selma, Alabama. When the line was constructed in 1870, the M&WP was merged into the WRA, creating a line from Selma to West Point, Georgia. It served Auburn, Alabama and connected in Opelika, Alabama to the Central of Georgia line from Columbus, Georgia to Birmingham, Alabama. Although it was partially owned by the Central of Georgia around the turn from the nineteenth to the twentieth century, it did not end up being owned by Norfolk Southern when that company came into existence due to the merger of the CofG's parent, the Southern Railway, and the Norfolk & Western Railway.

<span class="mw-page-title-main">Chesapeake and Ohio 614</span> Preserved American 4-8-4 locomotive

Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the primary purpose of hauling long, heavy, high speed express passenger trains for the Chesapeake & Ohio Railway such as the George Washington and the Fast Flying Virginian. Retired from active service in the late 1950s, the 614 was preserved and placed on display at the B&O Railroad Museum in Baltimore, Maryland. Between 1979 and 1980, restoration work on the locomotive to operating condition took place and it was used for extensive mainline excursion service from the early 1980s until the late 1990s. Since 2011, the locomotive has been on display at the C&O Railway Heritage Center in Clifton Forge, Virginia.

<span class="mw-page-title-main">ALCO FA</span> American locomotive class

The ALCO FA was a family of B-B diesel locomotives designed to haul freight trains. The locomotives were built by a partnership of ALCO and General Electric in Schenectady, New York, between January 1946 and May 1959. Designed by General Electric's Ray Patten, they were of a cab unit design; both cab-equipped lead FA and cabless booster FB models were built. A dual passenger-freight version, the FPA/FPB, was also offered. It was equipped with a steam generator for heating passenger cars.

<span class="mw-page-title-main">Georgia State Railroad Museum</span> United States historic place

The Georgia State Railroad Museum is a museum in Savannah, Georgia located at a historic Central of Georgia Railway site. It includes parts of the Central of Georgia Railway: Savannah Shops and Terminal Facilities National Historic Landmark District. The complex is considered the most complete antebellum railroad complex in the United States. The museum, located at 655 Louisville Road, is part of a historic district included in the National Register of Historic Places.

Maine Central Railroad Class O locomotives were originally intended for heavy freight service. They were of 4-6-0 wheel arrangement in the Whyte notation, or "2'C" in UIC classification. They replaced earlier class P 2-6-0 locomotives beginning in 1903. They were in turn replaced by class W 2-8-0 locomotives for the heaviest freight service beginning in 1910, but remained in use on branch line trains until replaced by diesel locomotives after World War II. They proved so well-suited for branch line service the design was among the last steam locomotives built for the Maine Central.

Maine Central Railroad began operating diesel locomotives in 1935, and had retired all steam locomotives by 1954. That time interval was a joint operating period with the Boston and Maine Railroad (B&M). This article describes diesel locomotives owned by Maine Central through the period of joint operation and later independent operation prior to Guilford Rail System control in 1981.

<i>Seminole</i> (train) Passenger train

The Seminole, also known as the Seminole Limited, was a passenger train operated by the Illinois Central Railroad, Central of Georgia Railway, and Atlantic Coast Line Railroad between Chicago, Illinois and Jacksonville, Florida. It operated from 1909 to 1969 and was the first year-round service between the two cities.

<span class="mw-page-title-main">Central of Georgia Railway 509</span>

Central of Georgia Railway 509 is a 2-8-0 configuration steam locomotive and tender consolidation on static display in downtown Macon, Georgia, United States. After being removed from service at the end of the steam era, it was given to the city of Macon.

<span class="mw-page-title-main">Chesapeake and Ohio class H-8</span> Class of 60 American 2-6-6-6 locomotives

The Chesapeake and Ohio class H-8 was a class of 60 simple articulated 2-6-6-6 steam locomotives built by the Lima Locomotive Works in Lima, Ohio between 1941 and 1948, operating until the mid 1950s. The locomotives were among the most powerful steam locomotives ever built and hauled fast, heavy freight trains for the railroad. Only two units were preserved; Nos. 1601 and 1604.

<span class="mw-page-title-main">Louisville and Nashville class M-1</span> Class of 42 American 2-8-4 locomotives

The Louisville and Nashville M-1 was a class of forty-two 2-8-4 steam locomotives built during and after World War II as dual-service locomotives. They were nicknamed "Big Emmas" by crews and were built in three batches between 1942 and 1949.

References

  1. "Recent Loses". Archived from the original on 2018-04-16. Retrieved 2018-04-22.